190E 190D Shift Lever Cover Removal w/ Switch and Light Bulb Replacement
Introduction
Welcome to Grafco Electric, your trusted source for high-quality automotive electrical parts and repair tutorials. In this guide, we will provide you with comprehensive step-by-step instructions on how to remove the shift lever cover and replace the switch and light bulb in your 190E or 190D model. Whether you're a DIY enthusiast or a professional mechanic, this guide will equip you with the knowledge and expertise to successfully complete the task.
Tools and Materials
Before starting the process, it's essential to gather the necessary tools and materials. Here's a list of what you'll need:
- Flathead screwdriver
- Torx wrench set
- Replacement switch and light bulb
- Shop towels or rags
Step-by-Step Guide: Shift Lever Cover Removal
Step 1: Disconnect the Battery
As a safety precaution, start by disconnecting the negative terminal of the battery to prevent any electrical mishaps during the process. It's important to ensure that the battery is completely disconnected before proceeding with any further steps.
Step 2: Remove the Shift Knob
Use a flathead screwdriver or a similar tool to gently pry off the shift knob. Apply gentle pressure and work your way around the base until the shift knob is loose enough to be removed.
Step 3: Remove the Shift Boot
Once the shift knob is removed, carefully lift the shift boot up and over the shifter lever. Take your time to avoid any damage to the boot.
Step 4: Locate and Remove the Screws
Locate the screws or bolts that secure the shift lever cover in place. Depending on your specific model, these may be visible or hidden under small covers. Use a Torx wrench set to remove the screws. Keep track of the screws and keep them in a safe place to avoid misplacing them.
Step 5: Disconnect the Wiring Harness
Once the screws are removed, carefully detach the wiring harness connected to the switch. Take note of the wire routing and connections to ensure proper reassembly later.
Step 6: Remove the Shift Lever Cover
With the screws and wiring harness disconnected, you can now lift the shift lever cover off the assembly. Take care not to force it or damage any surrounding components.
Step-by-Step Guide: Switch and Light Bulb Replacement
Step 1: Remove the Defective Switch
Locate the switch that needs replacement. Depending on your model, it may be held in place by screws or clips. Use the appropriate tools to remove the defective switch, paying attention to its positioning and wiring connections for easier installation of the new switch.
Step 2: Replace with New Switch
Take the new switch and align it with the positioning of the old one. Carefully connect the wiring harness to the new switch, ensuring the connections are secure. If the switch requires screws for mounting, use the appropriate torque to fasten it in place.
Step 3: Replace the Light Bulb
Inspect the light bulb located within the shift lever cover. If it's burnt out or no longer functioning, now is the time to replace it. Gently remove the old light bulb and replace it with a new one, making sure it fits securely into the socket.
Reassembly
Once you've successfully replaced the switch and light bulb, follow these steps in reverse order to reassemble the shift lever cover:
- Reattach the shift lever cover, ensuring proper alignment.
- Connect the wiring harness to the switch.
- Secure the shift lever cover with the screws or bolts previously removed.
- Reinstall the shift boot, making sure it fits properly over the shifter lever.
- Replace the shift knob by firmly attaching it to the lever.
Conclusion
Congratulations! You have successfully completed the process of removing the shift lever cover, replacing the switch, and changing the light bulb in your 190E or 190D. By following this comprehensive guide, you've saved time and money by doing it yourself. At Grafco Electric, we are committed to providing you with helpful resources and top-quality automotive electrical parts. We hope this guide has been valuable to you, and we're always here to assist you with any further questions or concerns.
