Side Marker Lens Removal and Bulb Replacement

Welcome to Grafco Electric, your go-to resource for all things automotive electrical. In this guide, we will walk you through the process of removing and replacing the side marker lens and bulb on Mercedes vehicles with 116, 107, 123, and 126 chassis. Our step-by-step instructions will help you accomplish this task with ease. Let's get started!

Step 1: Gather the Necessary Tools

Before you begin, make sure you have the following tools:

• Screwdriver (size may vary depending on the model)
• Needle-nose pliers
• Replacement side marker lens and bulb
• Protective gloves and eyewear

Step 2: Accessing the Side Marker Lens

To access the side marker lens, follow these steps:

1. Locate the side marker lens on your vehicle. It is typically located near the front or rear fender.
2. Using the appropriate screwdriver, remove the screws or clips securing the lens in place. Set them aside for reassembly later.
3. Gently pry the lens away from the body of the vehicle using the needle-nose pliers. Be careful not to apply too much force and damage the lens or surrounding area.
4. Once the lens is free, disconnect any wiring harnesses attached to it. Take note of their positions for reinstallation.

Step 3: Replacing the Bulb

Now that you have removed the side marker lens, it's time to replace the bulb. Follow these instructions:

1. Inspect the bulb socket to identify the type of bulb needed for replacement. You can refer to your vehicle's manual for specific bulb information.
2. Gently twist the bulb counterclockwise to remove it from the socket.
3. Insert the new bulb into the socket and twist it clockwise to secure it in place.

Step 4: Installing the Side Marker Lens

With the new bulb in place, it's time to reassemble the side marker lens. Follow these steps:

1. Carefully reconnect any wiring harnesses to the lens, aligning them with their corresponding connectors. Ensure a secure connection.
2. Position the lens back into its original location on the vehicle's body.
3. Align the screw holes or clips with their respective openings on the body.
4. Using the screws or clips you previously removed, secure the lens in place. Be mindful not to overtighten.

Congratulations! You have successfully removed and replaced the side marker lens and bulb on your Mercedes 116, 107, 123, or 126 chassis. If you have any other electrical issues or need further guidance, feel free to explore our collection of tutorials and videos for comprehensive assistance. Grafco Electric is here to support your automotive electrical needs.

Disclaimer: The information provided in this guide is for educational purposes only. Always consult your vehicle's manual or seek professional assistance if you are unsure about performing any automotive maintenance tasks.