1986 to 1993 126 and 124 Plastic Headlight Door Removal and Replacement

Welcome to Grafco Electric, your trusted source for high-quality automotive electrical components and instructional guides. In this detailed demand video guide, we will provide you with comprehensive instructions on efficiently removing and replacing the plastic headlight doors on 1986 to 1993 126 and 124 models. Follow along step by step to ensure a hassle-free process and restore the perfect functionality of your vehicle's headlights.

Why Replace the Plastic Headlight Doors?

Over time, the plastic headlight doors on your 1986 to 1993 126 and 124 models can become worn, faded, or damaged due to various environmental factors. Not only does this affect the appearance of your vehicle, but it can also compromise the performance and functionality of your headlights. By replacing these worn-out plastic doors, you can enhance both the aesthetics and the efficiency of your vehicle's lighting system.

Tools and Materials Needed

Before jumping into the removal and replacement process, ensure you have the following tools and materials readily available:

• Screwdriver set
• Plastic pry tools
• Replacement plastic headlight doors
• Protective gloves

Step-by-Step Instructions

Step 1: Preparation

Begin by parking your vehicle in a safe and well-lit area. It's essential to turn off the engine and allow it to cool down before starting the process to avoid any potential injuries. Put on your protective gloves to ensure your safety during the procedure.

Step 2: Accessing the Headlight Doors

In order to access the plastic headlight doors, open the hood of your vehicle. Locate the retaining screws or clips that secure the doors in place. Depending on the specific model, you may need to remove other components or parts, such as the grille, to gain full access to the headlight doors. Use the appropriate tools, such as the screwdriver or plastic pry tools, to carefully remove the retaining screws or clips.

Step 3: Removing the Old Plastic Headlight Doors

Once you have successfully removed the retaining screws or clips, gently pull the old plastic headlight doors away from the vehicle. Take extra caution during this step to prevent any damage to the surrounding areas or other components of the vehicle. Inspect the removed doors for any signs of damage or wear that might indicate the need for replacement.

Step 4: Installing the New Plastic Headlight Doors

With the old doors removed, it's time to install the new plastic headlight doors. Carefully align the new doors with the designated slots and ensure they fit securely. Use the previously removed retaining screws or clips to fasten the new doors in place. Double-check that each door is properly aligned and securely attached before moving on to the next step.

Step 5: Finalizing the Installation

Once the new plastic headlight doors are securely installed, it's important to test their functionality before finishing the process. Close the hood of your vehicle and turn on the headlights. Verify that the doors open and close smoothly and that the headlights provide the desired illumination.

Additional Tips

Here are some additional tips to ensure a successful plastic headlight door removal and replacement:

• Refer to the vehicle's manual or consult an expert if you encounter any difficulties during the process.
• Inspect the integrity of the electrical connections related to your headlights, as damaged wiring may affect their performance.
• Consider cleaning or polishing the headlights themselves while the doors are off to further enhance the overall appearance of your vehicle.

By following these detailed instructions, you can efficiently remove and replace the plastic headlight doors on your 1986 to 1993 126 and 124 models, ensuring optimal functionality and an improved aesthetic appeal. At Grafco Electric, we prioritize providing our customers with comprehensive guides and high-quality automotive components to enhance their driving experience.

For any additional questions or to explore our wide range of automotive electrical components, feel free to browse our website or contact our expert team. Let Grafco Electric be your go-to source for all your automotive electrical needs!