Mercedes W201 Chassis 190E 190D Hood Strut Replacement Procedures

Feb 17, 2020
Chassis

Introduction

Welcome to Grafco Electric's comprehensive guide on Mercedes W201 Chassis 190E 190D hood strut replacement procedures. In this detailed guide, you'll find step-by-step instructions, tips, and everything you need to know to replace your hood struts efficiently.

Why Replace Your Hood Struts?

Over time, the hood struts on your Mercedes W201 chassis 190E 190D may lose their ability to support the hood properly. This can lead to issues such as difficulty in opening or closing the hood, hood instability, or even accidents caused by sudden hood closure. By replacing your hood struts, you not only ensure your safety but also protect other engine components from potential damage.

Tools and Materials Needed

  • Flat-head screwdriver
  • Wrench set
  • Replacement hood struts
  • Safety goggles
  • Protective gloves

Step-by-Step Instructions

Step 1: Preparation

Park your Mercedes W201 chassis 190E 190D on a flat surface and engage the parking brake. Ensure your engine is turned off, and prop the hood open with a suitable support rod to keep it in place.

Step 2: Locate and Remove the Old Struts

Locate the old hood struts on each side of the hood. Using a flat-head screwdriver, carefully pry off the retaining clips on both ends of the struts. Once the clips are released, use a wrench to unscrew the bolts securing the struts to the hood and body of the vehicle. Remember to hold the hood firmly to prevent it from accidentally falling.

Step 3: Install the New Struts

Take the replacement hood struts and position them in place of the old ones. Align the bolt holes on the struts with the corresponding holes in the hood and body. Using a wrench, tighten the bolts securely, ensuring a snug fit.

Step 4: Test the Hood Struts

With the new hood struts installed, carefully remove the support rod holding the hood up. Gently lower the hood until it latches securely. Open and close the hood a few times to ensure the struts are working correctly and provide sufficient support.

Tips and Precautions

  • Always wear safety goggles and protective gloves to prevent any accidental injuries.
  • If you encounter any difficulties during installation, consult a professional mechanic or refer to your vehicle's manual.
  • Ensure you are using high-quality replacement hood struts specifically designed for your Mercedes W201 chassis 190E 190D.
  • If the hood struts appear weak or damaged, it's best to replace both of them to ensure proper stability and functionality.

Conclusion

Congratulations! You have successfully replaced the hood struts on your Mercedes W201 chassis 190E 190D. By following this comprehensive guide, you have ensured the safety and stability of your hood, protecting both yourself and your vehicle. Should you encounter any further issues or have questions, do not hesitate to contact Grafco Electric for professional assistance.

More posts